HPC199 AI Vehicle Counter has a built-in AI processing chip, which can independently complete target identification, tracking, counting and control locally. It can be used in traffic statistics, regional management, overload control, anti-tailing control and other scenarios. At the same time, it can be connected with the brand DVR hard disk video recorder, providing a multi-functional and multi-purpose counting product with HD video monitoring function. It can be used alone or online, and it can be used for commercial retail industry, tourism, park and other managers to provide decision-making passenger flow data support, can provide intelligent security control solutions for banks, road traffic and other industries.
Product composition:
Accessories:
HPC199 AI counter * 1
Bracket * 1
Power Adapter * 1
Network Cable * 1
Standard Lens
Please check the focal length of the standard lens. The lenses are divided into 5 mm, 8 mm, 16 mm and 25 mm to determine whether they are consistent with the purchase requirements.
HPC19850
HPC19880
HPC198160
HPC198250
camera lens
5.0mm
8.0mm
16mm
25mm
Distance detection
5-15m
8-25m
10-35m
15-50m
Power supply mode
DC12V power Adapter
Power consumption
5W
processor
Binuclear ARM cortex A53 1.5GHz 32KBI-cache
image sensor
SONY IMX, 1/1.8” Progressive Scan CMOS
Minimum illumination
0.1 Lux (Streetlight environment at night)
Frame rate
10-30 frame/second
resolving power
Main stream 3840×2160 Sub stream 1280×720
Image standards
H265 / H264 / MJPEG
Protocol
Onvif / http / modbus / RS485
Vehicle attribute classification
Bus / truck / car / motorcycle (tricycle) / bicycle
Web software management
support
Local report
support
Data storage
256M
Interface mode
Network port, 485 port
Protection level
IP65
size
185mm* 85mm*90mm
temperature
-30~55℃
humidity
45 ~95 %
AI vehicle counter :
When used at night, the visible light should be added to the image acquisition area. HPC199 AI Vehicle counter has IP65 protection ability, which can meet the outdoor installation and use.
Ideal installation angle and position
The HPC199 AI vehicle Counter is installed in pole or wall mode. The installation height and shooting angle can be determined according to the actual situation of the scene. It is appropriate that the front vehicle does not block the rear vehicle. When the HPC199 AI Vehicle counter is used to photograph the side of the vehicle, it can obtain relatively ideal vehicle type recognition accuracy.
When the side of the vehicle cannot be photographed due to the installation height, distance from the vehicle and the camera blind area, it can also identify the vehicle better by using the angle of oblique front. HPC199 AI Vehicle counter is not recommended to be installed in front of the vehicle for shooting, which is easy to cause deviation for vehicle type identification. Please refer to the following figure for details:
Related AI people counter counting traffic in crowds:
We have a full range of counters available:IR counter /2D camera counter /3D camera counter /Occupancy Control system /Passenger counter/ Vehicle counter..etc